Technical data

Point and line laser	GCL 15-12 XG
Article number	‎3 601 K66 T..‎‎‎‎
Working range up to approx.^A)	15 m
Laser line aperture angle	100°
Levelling accuracy^B)^C)
Laser lines	±0.4 mm/m
Laser points	±1.0 mm/m
Self-levelling range	±4°
Levelling time	< 4 s
Recommended ambient temperature during charging	0 °C to +40 °C
Operating temperature	–5 °C to +40 °C
Storage temperature	–20 °C to +50 °C
Max. altitude	2000 m
Relative air humidity max.	90 %
Pollution degree according to IEC 61010-1	2^D)
Laser class	2
Laser lines
Laser type	< 8 mW, 515−530 nm
C₆	8
Divergence	12 mrad (full angle)
Laser points
Laser type	< 1 mW, 650–660 nm
C₆	1
Divergence	< 1.5 mrad (full angle)
Tripod mount	1/4"
Operating time, approx.^B)	> 6 h
Weight	0.45 kg
Dimensions (length × width × height)	122 × 62 × 104 mm
Lithium-ion battery
Charging connection	USB Type‑C®
Recommended USB Type-C® cable	1 600 A01 L6H
Rated voltage	3.6 V
Capacity	2 Ah
Max. battery charging time (with measuring tool switched off)	4 h
Power supply
Output voltage	5.0 V
Minimum output current	1.0 A

A): The working range may be reduced by unfavourable environmental conditions (e.g. direct sunlight).

C): The values stated presuppose normal to favourable environmental conditions (e.g. no vibration, no fog, no smoke, no direct sunlight). Extreme fluctuations in temperature can cause deviations in accuracy.

D): Only non-conductive deposits occur, whereby occasional temporary conductivity caused by condensation is expected.

The serial number (10) on the type plate is used to clearly identify your measuring tool.