Maintenance and Cleaning

Check the measuring tool before each use. If the measuring tool is visibly damaged or parts have become loose inside the measuring tool, safe function can no longer be ensured.

Always keep the measuring tool clean and dry to ensure optimum, safe operation.

Never immerse the measuring tool in water or other liquids.

Wipe off any dirt using a dry, soft cloth. Do not use any detergents or solvents.

Only store and transport the measuring tool in the protective bag (21) or the case (24).

If the measuring tool needs to be repaired, send it off in the protective bag (21) or the case (24).

If the wheels (2) are worn, they must be replaced. The wheels are available in the spare parts range of Bosch.

Changing the Coin Cell (see figure D)

To be able to save the time on the measuring tool, a coin cell (30) must be inserted.

Unscrew the screw (29) on the coin cell holder as far as it will go. Lift the coin cell holder (28) out of the measuring tool with an auxiliary tool (e.g. a flat-head screwdriver). Change the coin cell. Retighten the screw (29) after inserting the coin cell holder.