Switching On and Off

Carry out an accuracy check before starting operation and before beginning work see Accuracy Check and Calibration of the Measuring Tool.

Switching on

  1. Press the  button to switch on the measuring tool.
  2. The measuring tool emits the variable laser beam (1) from the outlet apertures (3).

Levelling starts automatically. During levelling, the laser is switched off and the slope angle indicator (8) flashes green see Automatic Levelling.

Once levelling is successful, the laser beam is switched on and rotation begins. The slope angle indicator (8) lights up green continuously.

The measuring tool works in rotational operation at the highest rotation speed.

All other operating modes can only be controlled via the Bosch Levelling Remote App see Remote control via Bosch Levelling Remote App.

Switching off

  1. Press and hold the  button.
  2. Release the  button as soon as the slope angle indicator (8) goes off (after approx. 1.5 s).
  1. The measuring tool will then switch itself off.

The measuring tool is protected against electrostatic discharge (ESD). If the measuring tool becomes electrostatically charged (e.g. when it is touched in an environment with low humidity), it switches off automatically.

  1. Switch the measuring tool off and on again as described above using the  button.

A hardware error may cause the measuring tool to switch off automatically. Before switching off, <Er> and <03> flash alternately for 3 seconds in the slope angle indicator (8).

  1. Have the measuring tool checked by a Bosch customer service agent.

The measuring tool will switch off automatically in the following circumstances in order to protect the rechargeable battery/batteries:

  • The measuring tool is outside of the self-levelling range for more than 10 min.
  1. Reposition the measuring tool and switch on again.
  • The maximum permitted operating temperature has been exceeded (all displays flash 3 times before the tool switches off).
  1. Before switching back on, allow the measuring tool to cool down.