Wall Bracket with Alignment Unit
The measuring tool can be secured to the wall using the wall mount with the alignment unit (33). Using the wall mount is recommended, e.g. when working above the maximum extension height of tripods, or when working on unstable surfaces without a tripod.
- Fasten the wall bracket (33) to a wall using a screw through the fixing hole (27).
- Alternatively, you can clamp the wall bracket (33) to crown mouldings, for instance, using the fixing clamp (28).
- Fit the wall mount as perpendicular as possible and ensure it is mounted in a stable way.
- Screw the 5/8" wall mount screw (31) into the horizontal tripod mount (16), depending on the requirements of the task, or the vertical tripod mount (18) on the measuring tool.
Using the alignment unit allows the measuring tool to be moved in a range of approx. ±45 mm with respect to height.
- Loosen the locking screw (32) of the alignment unit.
- Press the (29) pushbutton.
- Slide the alignment unit to roughly the required height.
- Align the laser beam precisely to the required reference height using the fine adjustment screw (30).
- Retighten the locking screw (32).