Switching on/off

Note: Slide the lock-off switch (11) towards to unlock the on/off switch (10).

To start the power tool, press and hold the on/off switch (10).

The worklight (12) lights up when the on/off switch (10) is lightly or fully pressed, allowing the work area to be illuminated in poor lighting conditions.

To switch off the power tool, release the on/off switch (10).

Note: After finishing work, slide the lock-off switch (11) towards to lock the on/off switch (10).

The permitted ambient temperature during operation is –20 °C to 50 °C.