Technical Data

Universal detector	D-tect 200 C
Article number	‎3 601 K81 6K0‎‎‎‎ ‎3 601 K81 6B0‎‎‎‎
Max. object detection depth^A)
In dry concrete
Metal objects	200 mm
Other objects	80 mm
Metal objects in early age concrete	60 mm
Wooden beams in dry walls	38 mm
Objects in horizontally perforated bricks	50 mm
Objects in other supported wall types	80 mm
Accuracy of object centre measurement^A)	±5 mm
Accuracy of indicated object depth^A)
In dry concrete	±5 mm
In early age concrete	±10 mm
Minimum distance between two neighbouring objects^A)	40 mm
Accuracy of distance measurement^B)	±10 mm/m
Radar sensor
Operating frequency range	1.8–5.8 GHz
Max. transmission power	0.00001 mW
Inductive sensor
Operating frequency range	48–52 kHz
Max. magnetic field strength (at 10 m)	20 dBµA/m
Max. altitude	2000 m
Relative air humidity max.	90 %
Relative air humidity max. for "live" material identification	50 %
Pollution degree according to IEC 61010-1	2^C)
Measuring tool power supply
Rechargeable battery (Li-ion)	10.8 V/12 V
Non-rechargeable batteries (alkaline manganese)	4 × 1.5 V LR6 (AA) (with battery adapter)
Approx. operating time
Rechargeable battery (Li-ion)	6 h
Non-rechargeable batteries (alkaline manganese)	2 h
Backup power supply for saving the time
Coin cell	CR2032 (3 V lithium battery)
Battery life approx.	12 months
Weight according to EPTA-Procedure 01:2014
With rechargeable battery	0.69−0.70 kg^D)
With non-rechargeable batteries	0.64 kg
Dimensions (length × width × height)	231 × 106 × 112 mm
Protection rating^E)	IP 5X
Recommended ambient temperature during charging	0 °C to +35 °C
Permitted ambient temperature during operation	–10 °C to +50 °C
Permitted ambient temperature during storage	–20 °C to +70 °C
Recommended rechargeable batteries	GBA 10,8V 2.0Ah GBA 10,8V 3.0Ah GBA 12V 2.0Ah GBA 12V 3.0Ah
Recommended chargers	GAL 12… GAX 18…

A): Depends on material and size of the objects, as well as material and condition of the substrate and the selected view. The best results can be obtained in homogeneous, dry substrates. In addition, a deviation in the indicated object depth of ±0.5 mm/cm for objects deeper than 60 mm must be taken into account.

B): Depends on the material and condition of the substrate

C): Only non-conductive deposits occur, whereby occasional temporary conductivity caused by condensation is expected.

D): Depends on battery in use

E): The lithium-ion battery and AA1 battery adapter are not covered by IP 5X.

The serial number (20) on the type plate is used to clearly identify your measuring tool.

The accuracy and detection depth of the measuring result may be negatively affected if the condition of the substrate is unfavorable.