By Trade
By Category
.png)
.png)
S 2041 HM Endurance for Aerated Concrete Reciprocating Saw Blade delivers ultimate blade life and fast cuts in special materials
The S 2041 HM Endurance for Aerated Concrete Reciprocating Saw Blade delivers ultimate blade life with fast cutting in special materials. Its ground carbide teeth are designed for cutting highly abrasive mineral-based materials. Moreover, the blade’s very large tooth pitch (12.7 mm) and side-set teeth provide rapid cutting results, while its wide body (22 mm) and extra-thick gauge material (1.5 mm) provide maximum stability. This reciprocating saw blade features a carbide tooth strip, which is welded on a highly elastic carbon steel body with Carbide Technology, enabling cuts in even the toughest abrasive materials such as aerated concrete blocks. Its extra-long length of 400 mm enables a cutting capacity of up to 350 mm. For use with reciprocating saws with 1/2 inch universal shank systems.
Ground carbide teeth designed for cutting highly abrasive mineral-based materials
Very large tooth pitch/side-set teeth for rapid cutting, wide body/extra-thick gauge material for maximum stability
Carbide Technology enables cuts in even the toughest abrasive materials such as aerated concrete blocks
| Part number | Tooth design | Tooth spacing [mm] / TPI | Total length [mm] | Width [mm] | Pack quantity | |
|---|---|---|---|---|---|---|
|
2 608 650 975
|
side set, ground | 12.7 / 2 | 400 | 22 | 2 Pcs |
